Where the Care App and Care Portal are mentioned, the articles in the Support Center refer to both the professional Plan (Care Lab App and Care Lab Portal) and the enterprise Plan (Care App and Care Portal), unless indicated otherwise.
The ‘M!’ icon shown on the EmbracePlus display indicates that its internal memory is full. This happens when EmbracePlus is disconnected from the Care App on the paired companion device for a long period of time, causing the recorded data to be stored in the EmbracePlus internal memory until it is full. Note that if a connection is not established once the memory is full, EmbracePlus will stop collecting further data.
To resolve the full memory issue, place EmbracePlus within Bluetooth range of the paired companion device and open the Care App to re-establish the connection. As soon as EmbracePlus connects with the companion device, the stored data will be automatically synced. You will see the status ‘EmbracePlus is syncing’ on the Care App confirming the data sync.
Android If the companion device is Android, we also recommend checking our configuration tips to disable battery optimization and allow the Care App to run in the background.
If EmbracePlus doesn’t start syncing, follow the steps below. Note that the problem may get resolved at any point of the procedure. Check the status update, which should switch from red to teal or yellow:
- Place EmbracePlus on the cable charger. You will see the battery percentage and a battery icon appear on the display.
- Open the Care App, which should indicate the status ‘EmbracePlus memory is full’. Wait ~1 min to check if the status changes to teal with the message ‘EmbracePlus is syncing’ or ‘EmbracePlus is charging’ if it is on the cable charger.
- Close the Care App.
- BYOD Force close the Care App and open it again after ~5 seconds.
- provisioned Reboot the companion device and open the Care App.
If the issue persists, fill the form by clicking on Submit a request at the bottom of this page or by going to this link. Please provide all the information needed to the Empatica Support Team and we will then reach out directly to assist you further.